How to apply L'ariel Lashes:
2. Before you actually glue the lash of choice, measure the length of the band so that it lines up directly with the lash line. For an idea of where the lash band should end and to avoid the lash from hanging off the end of the eye the lash should be placed just a couple of lashes from the outer corner of the eye and end where the natural bulk of the lashes begin. If trimming is needed, trim from the outside of the lash directly on the black line and NOT into the lash. If you cut into the lash you risk the possibility of cutting off extra lashes from the strip.
3. Once you've measured and trimmed the lash to fit the eye next glue must be applied. Gently squeeze the tube of glue while dragging it across the lash band with a little more glue being used on both ends of the lash. Wait 30 seconds for the glue to dry allowing it to become tacky so that it sticks to the lash line after the lash is applied.
4. After allowing the glue to become tacky, carefully place the lash strip onto your lash line then press down with your fingers or tweezers from the middle, then working towards the outer edge and inner corner.
Removing/Cleaning L’ariel Lashes:
-Once you have removed the lash from your eye you will want to remove any remaining glue and makeup residue from the lash band. Use a q-tip and oil free remover to remove any eyeshadow and gently pull the glue off the band with tweezers. When the lashes are clean store them back in the case to dry so they are ready to wear for the next day. I do not recommend using soap and water or oil based products on the lashes because it will ruin the hairs of the lash.
Caring for L’ariel Lashes:
-If you can help it, try to use little to no mascara when applying your lashes. When too much masacrara is applied it will cause the mascara to transfer to the lash which will make them harder to clean and possibly damage the lash hairs.